Color Change. Convert Analine to Pigment Type

Click on Image Above for Larger View. Faded, Stained Leather Sofa Refinish. Convert Analine to Pigmented. Change color on leather

PRODUCTS used:


* Strong Cleaner:: clean leather, loosen soils and float contamninant to the surface so you can wipe them off.
* Leather Prep: clean & prepare surface for paint. Enhance adhesion. Loosen up oil & grease
* Surecoat Pigment Color: change or enhance the current color while maintaining the texture and look of leather and vinyl
* Crosslinker: improves water and solvent resistance, toughness, abrasion resistance. Enhance flexability & durability of Surecoat. Adding Crosslinker helps to make your leather cleaning easier in the long run.
* Leather Protectant: protect leather surface against daily soiling so it looks cleaner longer.

TOOLS used:
* Hair Dryer
* Gray Scuff Pad
* Fine 400grit sandpaper
* Foam Brush
* Sponge, Cloth
* Professional HVLP Spray Gun

Step-by-Step INSTRUCTIONS:

*STEP 1: Wipe Cleaner onto leather with a sponge. Wipe off loosen soil with a clean white cloth.

*STEP 2: Spray Leather Prep liberally. Scrub with a gray scuff pad if needed. Wipe off loose contaminants with a clean cloth.

*STEP 3: Wipe on Prebottom Solvent. Apply color coat right away when the prebottom solvent is still moist or tacky.

*STEP 4: Hand applied 1st color coat with a foam brush. If you have Spray Gun, spray the next coats. Add Crosslinker and Reducer before spraying/brushing. Wait until the prevevous coat dry before applying the next coat (typically 10-15minutes). On average, 3-4 coats is sufficient to yield a smooth, uniform finish (if you refinish with the same color tone).
NOTE: you can use hair dryer to speed up drying between color coats.

*STEP 5: Wipe on Leather Protectant with a sponge .


Let the products cure for 72 hours before regular sitting usage.