Leather Repair PRO
Your Dedicated Leather Care SpecialistsColorCoat for Plastic & Vinyl 16oz
Product Description
CLICK HERE for Video "How to Apply Color Coat" by SEM>
Features & Benefits:Great to restore or change color on most vinyl surfaces, flexible and rigid plastics, carpet and velour. Fade resistant, flexible and is a permanent coating Color Coat is not a dye. DO NOT USE ON LEATHER.
You can change to any color you want. However,we recommend to stay with the same color family and choose a slightly DARKER color than your current color is easier to blend.
If you restore with the same/similar color, one 16oz is good for one chair. A Loveseat would need 2 @16oz can. A Sofa or Sectional may need 3 can.
Apply in light, thin coat for better adhesion. Wait to dry (15 minutes in 80degrees temperature) before applying another coat. In general 3 to 5 coats would yield a smooth, even finish.
Your first coat may be blotchy. Don't worry. It should look even after the 3rd coat (if spraying evenly in thin coats).
Don't forget Vinyl Prep to clean & prepare the surface for better adhesion.
Available Colors:
SEM13023 Low Luster Clear Aerosol
SEM15003 Phantom White Aerosol
SEM15011 Landau Black Gallon
SEM15013 Landau Black Aerosol
SEM15023 Cordovan Brown Aerosol
SEM15033 Saddle Tan Aerosol
SEM15043 Shadow Blue Aerosol
SEM15053 Granite Aerosol
SEM15063 Burgundy Aerosol
SEM15083 Silver Aerosol
SEM15093 Light Buckskin Aerosol
SEM15103 Super White Aerosol
SEM15113 Firethorn Red Aerosol
SEM15123 Santa Fe Aerosol
SEM15133 Wedgewood Blue Aerosol
SEM15143 Sandstone Aerosol
SEM15163 Presidio Aerosol
SEM15173 Camel Aerosol
SEM15183 Warm Gray Aerosol
SEM15213 Blue Mist Aerosol
SEM15223 Castella Aerosol
SEM15233 Glass Black Aerosol
SEM15243 Satin Black Aerosol
SEM15253 Titanium Metallic Aerosol
SEM15273 Nap Red Aerosol
SEM15283 Pescadero Sand Aerosol
SEM15293 Tahoe Blue Metallic Aerosol
SEM15303 Graphite Aerosol
SEM15313 White Aerosol
SEM15323 Palomino Aerosol
SEM15353 Light Titanium Aerosol
SEM15363 Portola Red Aerosol
SEM15373 Flame Red Aerosol
SEM15393 Medium Gray Aerosol
SEM15413 Thomas Bud Gray Aerosol
SEM15423 Taupe Aerosol
SEM15433 Gloss Midnight Blue Aerosol
SEM15453 Gloss White Aerosol
SEM15463 Gloss Cabernet Aerosol
SEM15473 Thomas Green Aerosol
SEM15483 Bluebird Brown Aerosol
SEM15493 Bluebird Green Aerosol
SEM15541 Tinting White Gallon
SEM15603 Sailcloth White Aerosol
SEM15643 Pacific Blue
Accessories
SEM Soap Designed as a first step cleaner for all repair and refinish procedures. ONLY USE SEM SOAP when you REFINISH or RECOLOR the leather or vinyl. This product will remove some of the top coat finish. It's normal if you see colors come off when you scrub. * SEM SOAP gravitates into the pores of the substrate and floats contaminants to the surface. * SEM SOAP also contains a slight abrasive to open the substrate for greater adhesion. INSTRUCTIONS for Leather Refinish STEP 1: * Clean First with SEM SOAP and a Grey Scuff Pad * Srub thoroughly, paying close attention to textured or recessed areas * Wipe off SEM SOAP with a clean damp towel to remove all residue. Wiping in one direction will remove contaminants from the surface, rather than smearing contaminants around. STEP 2: * Clean with Leather/Plastic Prep using a clean lint free towel and wiping in one direction. * Place a few drop of water on the leather surface. If water beads up, contaminant or the old protection top coat still exists. Repeat the cleaning with Sem Soap, then Leather Prep until beading no longer occurs. STEP 3: * Scuff the leather a clean gray scuff pad OR 400 grit sandpaper * Blow off dust and clean again with Leather Prep STEP 4: Apply either SURECOAT OR CLASSIC COAT * Surecoat can be applied by Foam Brush AND/OR Spray Gun. Spraygun will typically yield a smoother, profesional finish. * Classicoat is a premixed paint ready in aerosol can. Spray about 6 inches from the leather surface. Instructions for VINYL Refinish. Procedure is SAME Instructions for LEATHER Refinish, EXCEPT: using VINYL PREP instead of Leather/Plastic Prep. $9.99 | Promotes adhesion to vinyl surfaces Softens substrates to prep them for painting Can be used as a wax and grease remover as well Sand Free softens substrates, promoting adhesion on difficult to sand automotive substrates $14.99 |
Questions? Email: support@LeatherRepairPro.com