Furniture Leather Color, Surecoat , BROWN (ish)

Save 10% OFF Just order Surecoat Paint and you are ready for a fun, rewarding recolor project. This kit is to used with Pigmented/Protected paint and NOT to be used with Analine dye.

Convenient Package for your DIY Leather Painting Needs. Save money on costly restoration project performed by the professionals. Follow our Step-by-Step instructions, and you will be proud of you Leather Recolor Project.

Leather Paint are sold seperately. Just select the Color Coat (brown tone) of your choice below under Accessories, OR for other color, visit our Furniture Recolor Section

STANDARD Kit contains:
* Sem Soap Designed as a first step cleaner for all repair and refinish procedures. SOAP gravitates into the pores of the substrate and floats contaminants to the surface. SOAP also contains a slight abrasive to open the substrate for greater adhesion. It's normal to see color comes off when you are scrubbing with Sem Soap. 15 oz package. Rub the soap into leather with a grey scuff pad. Wipe off residue with a clean towel.
* Leather/Plastic PREP areosol to clean & prepare surface for better adhesion 16oz.
* Surecoat Reducer to thin paint for spraying, 4oz
* Surecoat Crosslinker to increase adhesion & surface resistance to stains, .5oz
* SpraySet complete kit SpraTool/PowerPak to spray the color at the finish stage
* Foam Brush 2in to brush the color in, the first, 2nd base coat.
* Cup, Latex Gloves
* 400 grit Sandpaper, Scuff Pad

LARGE DELUXE KIT contains:
Everything in the Standard Kit PLUS:
* Surecoat Reducer 16oz (instead of 4 oz)
* Foam Brushes: 1in, 2in, 3in
* Cross Linker 1oz (instead of .05oz)
* 600 grit Sandpaper, Grey Scuff Pad
* Refill aerosol can for SpraTool/PowerPak
Large kit is typically recommended if you are restoring large pieces like a sofa and loveseat.

The biggest difference between this Deluxe Kit and the Basic Kit is the addition of the Spray tool and Reducer. It gives the flexibilty to both paint with a brush and SPRAY. Spraying yields a smooth, more profesional finish.

To view VIDEO Instructions of How to use the Spray Kit CLICK HERE

APPLICATION INSTRUCTIONS:


1/ Clean with SEM SOAP. Wet your grey scrub pad, then squeeze all excess water to make the pad lightly damp. Pour SEM Soap onto the damp pad and scrub your leather surface to remove dirt, soil, contaminants and any loose particles. Some of the old paint & color will come off and transfer to your pad. This is normal.

2/ Clean with SEM Plastic/Leather PREP. Spray your soiled leather liberally with Leather Prep. Wipe off the excess with a clean white towel. Don't worry if some stains remain. The main purpose of prepping is to lift the contaminants out and open the pores for better paint adhesion. Wait until it dries (about 10min-15min,depend on your room temperature) before painting.


3/ Use fine sand paper to smooth out any rough spots, scrapes and scratches. Reclean with Leather Prep if needed after sanding.


4/ ADD CROSSLINKER into your Surecoat paint before painting. Shake well. Crosslinker enhances surface resistance and prolong the life of your recoloring job.


4 (a)/ If Brushing, you don't need to add reducer. We normally apply the first coat with a foam brush and cover up all the edges, corners, hidden folds at this time. You may see light foam brush marks at this point. It will look better when it dries. Also spraying in the next step will provide a smooth finish.

4 (b)/ Now Mix REDUCER wih Surecoat paint to thin the colorant for easy, smooth spray. Shake well. Then Spray the next 2, 3 coats with the SpraTool (included in this package). Spraying yields a smoother finish when it dries. Spray in thin layers. Make sure the paint is dry (about 10-15minutes, depend on your room temperature) before applying another coat.

TIPS: if the unit does NOT spray, there are 2 common issues: 1/ You did not add enough Reducer, so the paint is too thick. Add a little more reducer, shake well(up to 30% of reducer can be added). 2/ The tip (red, blue, or white) is clogged. Use a pin, or needle and push thru the 2 tiny spray holes at the tip (air and paint) to clear the clog.

Allow the paint to cure for about 72 hours before normal usage.

Crosslilnker Increases the durability and resistance of SURE-COAT to the effects of most industrial and household chemicals which commonly affect water borne coatings. This additive to the sure-coat will allow the leather paint to stand up against future cleanings, especially if a person uses some type of harsh cleaner.

Crosslinker improves water and solvent resistance, toughness, abrasion resistance, flexability and long term durability of the coating.

Directions: Mix up to 3% crosslinker to the Surecoat right before painting.

Strong Cleaner is a mild, water based cleaner that can be used on a most aniline and pigmented leathers. It will clean soiling as well as most water based stains.

This product is used in the same manner as Leather Soft Cleaner, but its action is more intensive thanks to the greater concentration of active substances. The difference in this product is that it has twice the active cleaning ingredients.

Strong Cleaner can be used on all leathers types. It is very important that you use the product in combination with a sponge to foam the product, and a cloth to wipe away the excess dirt. This product does not remove the finish from any leather that has the proper rub resistance standards.

How to apply Strong Cleaner on Leather

1.Pour little amount on sponge; rub into sponge, gently squeeze the sponge to create foams. Then apply to leather in a circular motion. Work cleanser gently into leather (do not scrub leather).

2. Allow a few moments for the foam to dissolve the dirt, and then remove the foam with a clean white cloth to lift dirt from leather. If your furniture is heavily soiled allow the foam to stand for 30 seconds or longer before removing it.

NOTE: It is not unusual to see darkening of the leather; it will lighten again as it dries. This product is NOT a detergent, but rather a surfactant, so it needs a little extra time to work. Be patient.

3.Repeat process for stubborn soiling.

For Leather Types A, P & N

CLICK HERE for Video Instructions of Leather Master Strong Cleaner