Leather Repair PRO
Your Dedicated Leather Care SpecialistsKIT Basic: Leather PREP. Brush Method
Product Description
Save 10%OFF! This kit is essential to prepare for you leather painting job. Correct prep is a must for a successul color enhancing project. To be used with Surecoat. KIT includes:
* Sem Soap Designed as a first step cleaner for all repair and refinish procedures. SOAP gravitates into the pores of the substrate and floats contaminants to the surface. SOAP also contains a slight abrasive to open the substrate for greater adhesion. It's normal to see color comes off when you are cleaning with Sem Soap. 15 oz package. Rub the soap into leather with a grey scuff pad. Wipe off residue with a clean towel.
* Crosslinker .5oz, Increases the durability and resistance of SURE-COAT. This additive to the sure-coat will allow the leather paint to stand up against future cleanings. Crosslinker improves water and solvent resistance, toughness, abrasion resistance, flexability and long term durability of the coating.
Directions: Mix up to 3% crosslinker to the Surecoat color right before painting.
* Leather/Plastic Prep: Use to Prep the surface prior to apply color coat. Clean & Prepare surface for paint. It opens the substrate to enhance leather paint adhesion.
* Hand Scuff Pad. These pads lightly scuff the finish allowing better adhesion for the Dye. Apply light pressure when cleaning do not scratch the surface with the pads. Wipe clean with lint free cloth or paper towel after cleaning.
* Fine Grit Sandpaper: use sandpaper to smooth out scratches or bummper areas. Lightly buff the finish between coats.
* Foam Brush 3in
* Sponge
If you like a smoother, professional look as the final finish on your restoration, use a spray gun to paint. Our Deluxe Kit includes all of the above PLUS: Spray Tool and accompanying accessories.
APPLICATION INSTRUCTIONS:
1/ Clean with SEM SOAP. Wet your grey scrub pad, then squeeze all excess water to make the pad lightly damp. Pour SEM Soap onto the damp pad and scrub your leather surface to remove dirt, soil, contaminants and any loose particles. Some of the old paint & color will come off and transfer to your pad. This is normal.
2/ Clean with SEM Plastic/Leather PREP. Spray your soiled leather liberally with Leather Prep. Wipe off the excess with a clean white towel. Don't worry if some stains remain. The main purpose of prepping is to lift the contaminants out and open the pores for better paint adhesion. Wait until it dries (about 10min-15min,depend on your room temperature) before painting.
3/ Use fine sand paper to smooth out any rough spots, scrapes and scratches. Reclean with Leather Prep if needed after sanding.
4/ ADD CROSSLINKER into your Surecoat paint before painting. Shake well. Crosslinker enhances surface resistance and prolong the life of your recoloring job.
5/ Brush the color onto leather. Apply the first coat with a foam brush. While brushing, use your fingers to spread apart all edges, corner, hidden folds so you don't have areas with missing color. You may see light foam brush marks when the paint is still wet. It will look better when it dries. For a smoother finish, go with Deluxe Kit that inclue a srpayset.
Allow 72 hours for all the products to cure before normal usage
* Sem Soap Designed as a first step cleaner for all repair and refinish procedures. SOAP gravitates into the pores of the substrate and floats contaminants to the surface. SOAP also contains a slight abrasive to open the substrate for greater adhesion. It's normal to see color comes off when you are cleaning with Sem Soap. 15 oz package. Rub the soap into leather with a grey scuff pad. Wipe off residue with a clean towel.
* Crosslinker .5oz, Increases the durability and resistance of SURE-COAT. This additive to the sure-coat will allow the leather paint to stand up against future cleanings. Crosslinker improves water and solvent resistance, toughness, abrasion resistance, flexability and long term durability of the coating.
Directions: Mix up to 3% crosslinker to the Surecoat color right before painting.
* Leather/Plastic Prep: Use to Prep the surface prior to apply color coat. Clean & Prepare surface for paint. It opens the substrate to enhance leather paint adhesion.
* Hand Scuff Pad. These pads lightly scuff the finish allowing better adhesion for the Dye. Apply light pressure when cleaning do not scratch the surface with the pads. Wipe clean with lint free cloth or paper towel after cleaning.
* Fine Grit Sandpaper: use sandpaper to smooth out scratches or bummper areas. Lightly buff the finish between coats.
* Foam Brush 3in
* Sponge
If you like a smoother, professional look as the final finish on your restoration, use a spray gun to paint. Our Deluxe Kit includes all of the above PLUS: Spray Tool and accompanying accessories.
APPLICATION INSTRUCTIONS:
1/ Clean with SEM SOAP. Wet your grey scrub pad, then squeeze all excess water to make the pad lightly damp. Pour SEM Soap onto the damp pad and scrub your leather surface to remove dirt, soil, contaminants and any loose particles. Some of the old paint & color will come off and transfer to your pad. This is normal.
2/ Clean with SEM Plastic/Leather PREP. Spray your soiled leather liberally with Leather Prep. Wipe off the excess with a clean white towel. Don't worry if some stains remain. The main purpose of prepping is to lift the contaminants out and open the pores for better paint adhesion. Wait until it dries (about 10min-15min,depend on your room temperature) before painting.
3/ Use fine sand paper to smooth out any rough spots, scrapes and scratches. Reclean with Leather Prep if needed after sanding.
4/ ADD CROSSLINKER into your Surecoat paint before painting. Shake well. Crosslinker enhances surface resistance and prolong the life of your recoloring job.
5/ Brush the color onto leather. Apply the first coat with a foam brush. While brushing, use your fingers to spread apart all edges, corner, hidden folds so you don't have areas with missing color. You may see light foam brush marks when the paint is still wet. It will look better when it dries. For a smoother finish, go with Deluxe Kit that inclue a srpayset.
Allow 72 hours for all the products to cure before normal usage
Questions? Email: support@LeatherRepairPro.com